Geekvape E100i Vape Kit

The Geekvape E100i Vape kit is the latest version of the Aegis E100, designed for users who prefer compact and reliable vape kits. Its 3000mAh battery supports wattage outputs from 5W up to 100W. Unlike the removable battery version (E100), the E100i comes with a built-in cell, eliminating the need to carry spares or chargers when out and about.

This device is known for its IP68-rated protection, meaning it’s resistant to dust, minor drops, and water exposure. The kit includes a Geekvape E100 pod that pairs with the P Series coils. With a 2ml refillable capacity (TPD compliant), the pod supports DTL (Direct to Lung) vaping.

Which E-liquids Work Best with the Geekvape Aegis E100i?

The Geekvape E100i works best with high VG e-liquids (70% VG or higher), usually found in shortfills. These liquids run on low-resistance coils fitted on high-wattage devices. Some of the best e-juices for the device are:

• Bar Juice 5000 Shortfills (70VG/30PG)
• Zombie Juice 100ml E-liquid
• Riot Squad Shortfills

How to Use the E100i Geekvape? 

Follow these steps to set up your kit:

• First, remove the pod. For this, gently lift the pod.
• Now, prime the coil before inserting it into the tank. Add a few drops of e-liquid directly into the cotton openings to saturate it.
• Wait for a few minutes and then insert the coil into the tank. Twist to secure it in place.  
• Next, open the top fill cap by turning it slightly and lifting it off. You’ll see two filling ports on top of the tank. Slowly fill it with your e-liquid. Once filled, securely replace the top cap.
• Reattach the Pod. Place the filled pod back onto the Geekvape Aegis E100i; the magnetic connection will hold it in place.
• Click the fire button five times quickly to power on.
• Now, it’s time to select the coil type. Once the pod is connected, the screen will ask whether you’ve installed a new or old coil. Choose “new” for accurate readings.
• Adjust settings: 
• Three clicks of the fire button let you navigate modes: Power, Boost, Temperature Control, and Smart.
• Adjust wattage using the + / – buttons (5W–100W range).
• To lock the device, use the side switch to prevent accidental presses.
• Once set, press and hold the fire button or use the draw-activation function (if enabled). Adjust the airflow slider to fine-tune your inhale.

For display brightness, press Fire + Up to increase or Fire + Down to reduce it. The Geekvape E100i also tracks your puff count and displays wattage, voltage, and coil resistance on a clear 1.06-inch TFT screen.

Key Features

• 3000mAh built-in battery
• USB-C fast charging
• 5W–100W output range
• IP68 dust & water resistance
• 2ml refillable pod (TPD Compliant)
• Compatible with Geekvape P series coils
• Includes 0.2Ω and 0.4Ω coils
• Top-fill system
• Adjustable side airflow slider
• 1.06” TFT colour display
• Lock/unlock switch on the side
• Smart, power, and boost modes
• Puff counter and battery indicator
• Magnetic pod connection
• Type-C charging port at base
• DTL (Direct To Lung) vaping
• 510 drip tip compatible
• Fire button or auto draw activation

What’s in the Box

• Geekvape E100i Device
• Geekvape E100 Pod
• 0.2 Ohm Geekvape P Coil
• 0.4 Ohm Geekvape P Coil
• Spares Pack
• USB-C Charging Cable
• User Manual

FAQs

1 What is the difference between the Geekvape E100 and E100i?

The E100 uses a removable 18650 battery, while the E100i has a built-in 3000mAh battery. The E100i provides longer battery life, faster USB-C recharging, and a sealed design that improves dust and water resistance.

2. Can I use nic salts with the Geekvape E100i?

No. This vape kit is best suited for 70VG shortfills. Nic salts with higher PG ratios aren’t suitable for use with the low-resistance coil setup.

3. What coils work with the E100i Geekvape?

The E100i supports Geekvape P Series Coils only.

4. How do I adjust the airflow on Geekvape Aegis E100i?

Use the airflow slider to control the tightness or looseness of your draw.